- 產品中心/ Products
- 各類化工罐
- 瀝青庫
- 瀝青罐
- 各類風機
- 柴汽油罐
新聞中心/ News Center
| 風機主軸的特性和材質 |
| 發布者：admin 發布時間：2012-7-11 16:22:18 點擊：3242 |
| 風機主軸是連接風機風翅與風機底座的重要部件，無錫風力風機制造有限公司風機主軸是中空的，風機主軸的材質是不銹鋼的，內孔加工比較困難，現在對風機主軸的加工設備是深孔鉆鏜床，根據風機主軸的特性，深孔鉆鏜床要加高床頭。 風力發電機的主軸既有徑向偏移，又有軸向偏移。實際上，主軸的軸向偏移直接傳遞到齒輪箱的輸入軸。除非對調心滾子軸承的徑向游隙，軸向游隙控制以及行星輪的定位做特別處理，否則軸向的偏移會對齒輪箱里行星架支撐軸承產生不利的影響。主軸的軸向偏移取決于系統的剛性和固定端軸承的內部游隙。在固定端使用預緊的雙列圓錐滾子軸承后，主軸右端的軸向偏移幾乎比使用調心滾子軸承時減少4倍。減小軸向偏移可以減小軸向擠壓齒輪箱輸入軸的風險，這非常重要。（圖/文http://www.williamslock.com/） （中譯英） Fan shaft is connected with fan fin and fan base of important parts, fan shaft is hollow, the fan spindle is made of stainless steel, inner hole processing more difficult, now on the fan shaft processing equipment is deep hole boring machine, according to the characteristics of the wind machine spindle deep hole boring, heightening the bedside. Main shaft of wind power generator with radial deviation, and the axial offset. In fact, the spindle is axially offset are passed directly to the input shaft of the gear box. Unless the self-aligning roller bearing radial clearance, axial clearance control and planetary wheel positioning for special treatment, or axial offset on the gear box planetary frame supporting bearing adverse impact. The spindle is axially offset depends on system of rigid and fixed end bearing internal clearance. In the fixed end use preload double row tapered roller bearing, spindle right end axial displacement than the use of spherical roller bearing is almost4 times less. Decreasing axial shift axial extrusion can reduce the input shaft of the gear box of the risk, this is very important. |
| 上一頁：瀝青罐的瀝青溫度顯示器 下一頁：汽油罐原料本身的特殊性質 |
  |